Software & Firmware Download

Download from this page the appropriate software and firmware for your product. Is your product missing? Contact our office for more information.

Please note that your software or firmware is in a zip.file. Please download the file and unzip first and just use the.hex file for your firmware.

VPStudio Software for VPFlowScope

VPStudio 3

Version: 3.2.3

To configure:
VPFlowScope M

VPStudio 3.2 is required to configure your VPFlowScope M. Please be aware that your VPFlowScope M with firmware 2.2.0 or higher is not compatible with VPStudio 1.0 and 2.0. Moreover, VPStudio 3.2 is compatible with VPFlowScope M firmware 2.2.0 or higher.

VPStudio 3 will run only on Windows 10 machines, 64 bit.

VPStudio 1

Version: 1.25

To configure:
VPFlowScope In-line
VPFlowScope DP
VPFlowScope Probe

VPLog-i-R Configuration Software

To configure:

  • VPLog-i-R with Modbus outputs

Firmware for VPFlowScope

VPFlowScope M Transmitter Firmware

Version: 2.3.1.

Applicable for:
VPFlowScope M Transmitter

Firmware VPFlowScope In-line and Probe

Version: 1.21.20.

Applicable for the sensorprint of:
VPFlowScope In-line
VPFlowScope Probe

Firmware VPFlowScope DP

Version: 1.21.10

Applicable for the sensorprint of:
VPFlowScope DP

Remarks when upgrading your firmware

  • VPFlowScope M Transmitter firmware 2.2.0 or higher is compatible with VPSensorCartrigdes with serial number 6100658 and higher. Contact us if you have a VPSensorCartrigde with a serial number lower than 6100658.
  • VPstudio 3.2 is required to configure your VPFlowScope M. Please be aware that your VPFlowScope M with firmware 2.2.0 or higher is not compatible with VPStudio 1.0 and 2.0. Moreover, VPStudio 3.2 is compatible with VPFlowScope M firmware 2.2.0 or higher.
  • Updating your VPFlowScope M Transmitter goes via a VPFlowScope M Firmware Updater, which is enclosed with VPStudio 3.2. Follow the upgrade instructions.
  • The VPFlowScope Probe, In-line, DP firmware can be updated using VPStudio 1 software. This is the easiest way. With VPStudio 1, the update guides you through the process step by step.
  • Warning: When updating a VPFlowScope Probe, DP or VPFlowScope In-line, always use the RS485-port to update the firmware. Do NOT update another way (via USB or the USB port of the VPFlowTerminal) as it will erase the memory of the display module.